?22mm - tw series 593 usa: 800-262-idec canada: 888-317-idec switches & pilot lights display lights relays & sockets timers terminal blocks circuit breakers oiltight switches & pilot devices accessories tw series accessories appearance description/usage part number lamp removal tool rubber tool used to install or remove leds and incandescent lamps or-55 contact block remover used to remove contact blocks, transformers, lenses, and adaptors. can also be used to determine panel thickness adjustment. tw-kc1 nut locking wrench used in or-14 locking wrench to tighten locking nuts inside square bezel tw-kq2 metal bezel chrome plated bezels tighten onto operator (replacement for damaged bezels) standard octagonal units (chrome-pl.) aw-r8 full shroud octagonal units (chrome-pl.) aw-rf8 full shroud mushroom head units ? 40mm aw-g4 plastic bezel black plastic bezels for square buttons (replacement for damaged bezels) round ? ush units (black plastic) aw-rp1b round extended units (black plastic) aw-fp1b square units (black plastic) aw-q1b square units with full shroud (black plastic) AW-QF1B boot/cover used to cover and protect pushbuttons waterproof lens cover for square pilot lights apw00ln waterproof lens cover for square illuminated buttons apw00l clear boot for round ? ush units oc-31 clear boot for round extended units oc-32 *in place of asterisk, specify rubber boot color: b (black), g (green), r (red), y (yellow) - (nitril rubber) ocw-11* anti-rotation ring ring to prevent operator base from rotating in the mounting hole. used when nameplate is not used ogl-31 mounting hole plug black rubber plug ? lls unused mounting holes in panel. ob-31 metallic mounting hole plug for plugging unused mounting holes in the panel. tighten the attached locking ring to a torque of 12 kfg-cm maximum degree of protection: ip66 lw9z-bm replacement keys pair of keys (#0) tw-sk replacement black sleeve for keyswitch akw2b-b metal button guard used on ? ush buttons to prevent inadvertent actuation olw-c
|